 |
 |
 |
| For More Information or To Place an Order Call 1-800-942-1740 God Bless and Thank You for your business! S&S Products, American Flags & Flagpoles Troy, OH 45373 937-440-9900 |
| My Shopping Cart |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 | |  | |  | |  | |  | |  | |  |
Internal Halyard Parts & Accessories
Internal halyard flagpoles offer a clean looking design. We have all the parts you need to
keep your internal halyard flagpole working great for years.
keep your internal halyard flagpole working great for years.
| Internal Halyard Cable Assemblies Constructed of 1/8” and/or 3/16” stainless steel aircraft cable incorporating a stainless steel swivel to minimize the effect of unraveling due to the rotation of the truck assembly. The lower cable section has a copper cable stop attached to one end for installation into a stainless steel winch. This cable stop can easily be removed if the winch is an “M”-Type winch which does not require a cable stop. The upper cable section is supplied with a stainless steel thimble, 2 copper crimps, and two ball cable stops, however, because this section must be threaded through the truck assembly, these parts are not attached to the cable before shipment and must be attached in the field. These standard cable assemblies are designed for flagpoles with a winch installed at 5’ above grade. |
| Internal Halyard Retainer Rings Retainer rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on the upper and lower grommets of the flag. |
| RR5 Through RR12 |
| RR13 Through RR36 |
| Internal Halyard Beaded Retainer Rings stainless steel quick link. stainless steel quick link. |
| Internal Halyard Rope Retainer Rings Constructed of ¼” nylon wire center halyard with a zinc plated carbon steel thimble attached to one end with an aluminum crimp. Complete with stainless steel quick link. |
| Internal Halyard “M” – Winch The “M” – Winch is gearless and self locking at any point, eliminating the need for a separate break. This direct drive winch provides for rapid raising & lowering of the flag with little effort. This improved design does not require and welding thus avoiding discoloration when an anodized finish is required. No monthly lubrication is needed and this winch system is easily adaptable to existing on-site flagpoles. The winch is inserted into the pole and secured with a stainless steel bolt on the back side of the pole. Standard colors are Silver, bronze #313, White & Black. Please specify color when ordering. If not specified Silver will be sent. Other sizes available upon request. Pricing does not include a winch handle, which is sold separately. |
| Internal Halyard Flag Arrangement Constructed of 1/8” stainless steel aircraft cable with a stainless steel thimble attached at each end with 2 copper crimps. These flag arrangements provide the method of attaching the flag or flags to the cable assembly. This is also an excellent method for changing the quantity of flags or the size (s) of flag (s) without having to change the entire cable assembly. Standard arrangements are supplied with either 2 or 3 stainless steel quick links depending on the recommended flag size. Deluxe arrangements are supplied with a more complete set of accessories. |
| Internal Halyard Counterweights Fabricated from 2” diameter steel and then coated with plastisol. The 3-1/2” pound weights are supplied with one eyebolt attached to one end while the 7 pound and 14 pound weights are supplied with an eyebolt attached to each end. |
